Can the gearbox be welded if there is oil in it?

Feb 14, 2025 Leave a message

When there is oil in the gearbox, welding must not be performed directly. Safety regulations must be strictly followed:

Core reasons
Explosion risk: Oil substances will evaporate at high temperatures to produce flammable gases, and high temperatures during welding may cause explosions.
Welding quality impact: Oil stains will contaminate the welding parts, resulting in loose welds and affecting the repair effect.
Standardized operation procedures
Draining lubricating oil: Thoroughly drain the lubricating oil in the gearbox
Use professional containers to recycle waste oil
Deep cleaning: Soak and clean with sodium hydroxide solution (recommended)
Or rinse repeatedly with hot water + compressed air for more than 5 days
Safety verification: After filling with water, pass compressed air to test the sealing
Use soapy water to detect small leaks
Welding protection: Keep the box filled with cold water to cool down during welding
Wrap adjacent pipes with wet cloth
Equip fire extinguishing equipment on site
Alternative suggestions: For important parts, it is recommended to directly replace the new gearbox instead of risking repairs. If welding is necessary, contact a professional welding service organization for operation.