
The Straight line helical gearbox is designed on a modular combination system and is mainly composed of an input shaft, an output shaft, helical gears and a ribbed high-rigidity cast iron box, etc. The internal gears are usually made of high-quality alloy steel and undergo carburizing, quenching hardening treatment and fine gear grinding processing. Its advantages are remarkable. Not only is the structure compact and space-saving, but it also has a relatively high technological content. The transmission efficiency is as high as over 95%, with low energy consumption, which can effectively reduce the operating cost. With precise processing and optimized design, it has low vibration and noise during operation.
High-quality forged steel materials and rigid cast iron box bodies are selected, which have strong load-bearing capacity and can withstand overload. Moreover, the gear surfaces undergo high-frequency heat treatment, providing excellent wear resistance and ensuring long-term stable operation. The installation methods are diverse, including foot and flange installation forms, which can flexibly adapt to different working conditions and requirements. It is widely used in many industries such as metallurgy, chemical engineering, and sewage treatment
Features of Straight line helical gearbox
1.small offset output, compact structure, maximize the use of box space, the use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
2. Installation type and output mode: bottom seat and size flange installation, solid shaft output.
3. Input mode: direct motor, shaft input and coupling flange input.
4. Deceleration ratio: secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency: second level 96%, third level 94%, R/R combination 85%.
6. R series specially designed for mixing can bear large axial and radial forces.
Technical parameters: coaxial coaxial output
Some important parameters of Straight line helical gearbox
|
Item |
Details |
|
Type |
R Series Parallel Shaft Helical Gear Reducer |
|
Model |
R17, 27, 37, 47, 57, 67, 77, 87, 97, 107, 137, 147, 167 |
|
RF17, 27, 37, 47, 57, 67, 77, 87, 97, 107, 137, 147, 167 |
|
|
RX57, 67, 77, 87, 97, 107 |
|
|
RXF57, 67, 77, 87, 97, 107 |
|
|
Reduction Ratio |
Customized according to customer needs |
|
Input Power |
0.12kW~200kW |
|
Color |
Silver/Blue/Grey or Customized according to customer needs |
|
Housing Material |
Gray Iron,Ductile Iron (Customizable) |
|
Housing Hardness |
HT200 |
|
Gear Material |
20CrMnTi Alloy Steel |
|
Gear Surface Hardness |
HRC37°~62° |
|
Gear Core Hardness |
HRC30~45 |
|
Input/Output Shaft Material |
40Cr Alloy Steel |
|
Input/Output Shaft Hardness |
HRC25~30 |
|
Gear Machining Precision |
Precision Grinding, Grade 6 |
|
Heat Treatment |
Tempering, Carburizing, Quenching, etc. |
|
Efficiency |
94%~96% (depending on the transmission stage) |
|
Noise (MAX) |
60~68dB |
|
Temperature Rise (MAX) |
40°C |
|
Oil Temperature Rise (MAX) |
50°C |
|
Vibration |
≤20µm |
|
Back lash |
≤20Arcmin |
|
Bearing Brand |
Top Chinese Brand Bearings, C&U (Renben), or Customized Brands as per Customer Request (e.g., SKF, FAG, INA, NSK) |
|
Oil Seal Brand |
NSK/KSK |
|
Packaging |
Wooden Case |
|
Lubricating Oil |
GB L-CKC220-460, Shell Omala220-460 |
|
Applications |
Wastewater Treatment, Dredging Machinery, Steel Industry, Textile Industry, Conveying Machinery, Lifting Machinery, Chemical Industry, Fan Industry, Sugar Cane Production, Sugar Beet Production, Cable Car Industry, Cement Industry, Paper Machinery, Compressor Industry |
Hot Tags: straight line helical gearbox, China straight line helical gearbox manufacturers, suppliers, factory, bevel helical gear box, helical bevel gearmotor, Straight Line Helical Gearbox, 20 Hp Right Angle Gearbox, helical gear motor, Helical Bevel Gearbox







