Helical Gear Speed Reducer

Helical Gear Speed Reducer

Helical gear speed reducer adopts optimization and advanced design concept of module combination system.It is with small size, large transfer torque, smooth start, fine transmission ratio and other properties.it can be arbitrarily connected and a variety of installation positions.it can be selected according to user requirements . its highest power is up to 200KW.
Send Inquiry
Description
Technical Parameters

product-620-554

Product characteristics of helical gear speed reducer

 

1, space saving, reliable and durable, high overload capacity, power up to 200KW;

 

2, low energy consumption, superior performance, reducer efficiency of more than 95%;

 

3, low vibration, low noise, high energy saving;

 

4, the selection of high-quality forged steel material, steel cast iron box, gear surface through high-frequency heat treatment;

 

5, Precision machined gears ensure shaft parallelism and position bearings, which can form a helical gear drive assembly and a reducer equipped with a variety of motors. Combined into a mechanical and electrical integration, fully ensure the quality characteristics of product use.

 

 

FAQ

 

Q: Heat and oil leakage

A: In order to improve efficiency, the worm gear reducer turbine generally adopts Copper-9-4#, Copper-12-2# has four metals, and the worm adopts a harder 20Cr, Carburized and Quenched, and Surface Hardness 56-62HRC. Due to the sliding friction transmission, more heat will be generated during operation, the thermal expansion between the reducer parts and the seals is different, thus forming a gap in the mating surface, and the lubricating oil becomes thinner due to the increase in temperature, which is easy to cause leakage, because of the following four situations
First, the material collocation is unreasonable;
Second, the quality of the meshing friction surface is poor;
Third, the selection of the amount of lubricating oil added is incorrect;
Fourth, the assembly quality and the use of poor environment.

Q: Worm-gear wear

A: The worm gear is generally made of tin bronze, and the paired worm material is hardened to HRC4555 with 45 steel, or hardened to HRC5055 with 40Cr and then ground to a roughness Ra0.8μm by the worm grinder. The wear of the reducer is very slow during normal operation, and some reducers can be used for more than 10 years. If the wear speed is fast, it is necessary to consider whether the selection is correct, whether the overload operation, and the material, assembly quality or use environment of the worm gear.

Q: Gear wear

A: It generally occurs in the vertical installation of the reducer, mainly related to the amount of lubricating oil added and oil varieties. When installed vertically, it is easy to cause insufficient lubricating oil, when the reducer stops running, the transmission gear oil between the motor and the reducer is lost, and the gear can not get proper lubrication protection. When the reducer is started, the gear is not effectively lubricated, resulting in mechanical wear and even damage.

Q: Worm bearing damaged

A: In case of failure, even if the gearbox is well sealed, it is often found that the gear oil in the gearbox is emulsified, and the bearings are rusted, corroded, and damaged. This is because after the reducer runs for a period of time, the condensate generated after the gear oil temperature rises and cools is mixed with water. Of course, it is also closely related to bearing quality and assembly process.

Some parameters helical gear speed reducer

 

Item

Details

Type

RFKS Helical Gear Reducer

Reduction Ratio

Customized according to customer needs

Input Power

0.12kW~200kW

Color

Silver/Blue/Grey or Customized according to customer needs

Housing Material

Gray Iron,Ductile Iron (Customizable)

Housing Hardness

HT200

Gear Material

20CrMnTi Alloy Steel

Gear Surface Hardness

HRC37°~62°

Gear Core Hardness

HRC30~45

Input/Output Shaft Material

40Cr Alloy Steel

Input/Output Shaft Hardness

HRC25~30

Gear Machining Precision

Precision Grinding, Grade 6

Heat Treatment

Tempering, Carburizing, Quenching, etc.

Efficiency

94%~96% (depending on the transmission stage)

Noise (MAX)

60~68dB

Temperature Rise (MAX)

40°C

Oil Temperature Rise (MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Bearing Brand

Top Chinese Brand Bearings, C&U (Renben), or Customized Brands as per Customer Request (e.g., SKF, FAG, INA, NSK)

Oil Seal Brand

NSK/KSK

Packaging

Wooden Case

Lubricating Oil

GB L-CKC220-460, Shell Omala220-460

Applications

Wastewater Treatment, Dredging Machinery, Steel Industry, Textile Industry, Conveying Machinery, Lifting Machinery, Chemical Industry, Fan Industry, Sugar Cane Production, Sugar Beet Production, Cable Car Industry, Cement Industry, Paper Machinery, Compressor Industry

Hot Tags: helical gear speed reducer, China helical gear speed reducer manufacturers, suppliers, factory, helical speed reducer, Bevel Helical Reducer, reducer, Inline Helical Gear Reducer, Parallel Shaft Helical Gear Reducer, Helical Gear Speed Reducer