Helical Bevel Gear Reducer

Helical Bevel Gear Reducer

The helical bevel gear reducer is a versatile and highly efficient gearbox that combines the advantages of helical gears and bevel gears. Its benefits include low noise operation, stability, high torque output, and compact design,high efficiency.
Send Inquiry
Description
Technical Parameters

product-600-450

The helical bevel gear reducer is a bevel gearbox with a high stainless steel housing. Modular design, it can provide a variety of different combination methods, structural design and installation methods , it can meet a variety of production needs.

 

The correct installation of helical bevel gear reducer is an important part to ensure the normal operation of mechanical equipment. The following is the installation of helical gear reducer precautions

 

1.When installing the reducer, attention should be paid to the alignment of the transmission center axis, and the error should not be greater than the compensation amount of the coupling used. Good alignment can extend the service life and obtain the ideal transmission efficiency;

 

2, when the transmission is installed on the output shaft, it is not allowed to knock with a hammer, usually using the internal thread of the assembly fixture and the shaft end, and pressing the transmission part into the bolt, otherwise it may cause damage to the internal parts of the reducer. It is best not to use rigid fixed coupling, because the improper installation of this kind of coupling will cause unnecessary external load, resulting in early damage to the bearing, and even cause the fracture of the output shaft in serious cases;

 

3, the reducer should be firmly installed on a stable level of the foundation or base, the oil of the oil discharge tank should be able to exclude, and the cooling air circulation is smooth. The foundation is not reliable, causing vibration and noise during operation, and causing damage to bearings and gears. When the transmission connection has a protruding object or adopts gear and sprocket drive, it should be considered to install a protective device, and when the output shaft bears a large radial load, the reinforced type should be selected;

 

4, according to the prescribed installation device to ensure that the staff can be conveniently close to the oil mark, ventilation plug, oil drain plug. After installation, the accuracy of the installation position should be comprehensively checked in order.And the reliability of the fasteners should be flexible to rotate after installation. The helical bevel gear reduce is lubricated by splashing oil pool. Before operation, the user needs to remove the screw plug of the vent hole and replace it with a vent plug. According to different installation positions, and open the oil level plug screw to check the height of the oil level line, from the oil level plug to the oil from the plug hole overflow, screw on the oil level plug to confirm the correct, before the no-load test run, the time shall not be less than 2 hours. The operation should be smooth, no impact, vibration, noise and leakage of oil phenomenon, found abnormal should be eliminated in time.

Important parameters of helical bevel gear reducer

 

Item

Details

Type

K Series Spiral Bevel Helical Gear Reducer

Model

K37, 47, 57, 67, 77, 87, 97, 107, 127, 137, 157, 167, 187

KF37, 47, 57, 67, 77, 87, 97, 107, 127, 137, 157, 167, 187

KA37, 47, 57, 67, 77, 87, 97, 107, 127, 137, 157, 167, 187

KAF37, 47, 57, 67, 77, 87, 97, 107, 127, 137, 157, 167, 187

KAB37, 47, 57, 67, 77, 87, 97, 107, 127, 137, 157, 167, 187

Reduction Ratio

Customized according to customer needs

Input Power

0.12kW~200kW

Color

Silver/Blue/Grey or Customized according to customer needs

Housing Material

Gray Iron,Ductile Iron (Customizable)

Housing Hardness

HT200

Gear Material

20CrMnTi Alloy Steel

Gear Surface Hardness

HRC37°~62°

Gear Core Hardness

HRC30~45

Input/Output Shaft Material

40Cr Alloy Steel

Input/Output Shaft Hardness

HRC25~30

Gear Machining Precision

Precision Grinding, Grade 6

Heat Treatment

Tempering, Carburizing, Quenching, etc.

Efficiency

94%~96% (depending on the transmission stage)

Noise (MAX)

60~68dB

Temperature Rise (MAX)

40°C

Oil Temperature Rise (MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Bearing Brand

Top Chinese Brand Bearings, C&U (Renben), or Customized Brands as per Customer Request (e.g., SKF, FAG, INA, NSK)

Oil Seal Brand

NSK/KSK

Packaging

Wooden Case

Lubricating Oil

GB L-CKC220-460, Shell Omala220-460

Applications

Wastewater Treatment, Dredging Machinery, Steel Industry, Textile Industry, Conveying Machinery, Lifting Machinery, Chemical Industry, Fan Industry, Sugar Cane Production, Sugar Beet Production, Cable Car Industry, Cement Industry, Paper Machinery, Compressor Industry

Hot Tags: helical bevel gear reducer, China helical bevel gear reducer manufacturers, suppliers, factory, Parallel Shaft Helical Gear Reducer, helical gear reducer, Helical Bevel Speed Reducer, worm gear nmrv, Bevel Helical Reducer, Helical Bevel Gear Reducer