Industrial Worm Gearbox

Industrial Worm Gearbox

Industrial worm gears is easy to installation and have smooth operation and no noise. Strict quality management system Superior equipment Professional services OEM/ODM services Free samples of high quality products: 1) A wide variety of choices 2) Competitive price
Send Inquiry
Description
Technical Parameters

product-550-550

Industrial worm gearbox transmission ratio is large, can achieve high speed to low speed conversion in a small space, compact structure, small footprint. In some working conditions, it has self-locking, ensuring the safety of the equipment. Its transmission is smooth, low noise and low vibration. It has strong carrying capacity and is suitable for heavy-duty scenarios, but due to large sliding friction, high lubrication requirements and relatively low transmission efficiency, when using industrial turbo worm gear box, you can follow this method and recommendations, which can greatly improve the service life of industrial worm gear box.

 

Usage method

 

1.craftsmanship

1. After 500 hours of operation, the reducer should be changed for the first time, and the quality of the oil should be checked regularly in future use. Under normal circumstances, for long-term continuous work of the reducer, according to the operation of 2500 hours or once a year to replace the new oil, long-term disabled reducer, before re-operation should also be replaced with new oil. The reducer should be added with 320 lubricating oil, not mixed with different grades of oil, the same grade and different viscosity of the oil allowed to mix;

2, when changing the oil, wait for the reducer to cool down without burning danger, but it should still be kept warm, because after complete cooling, the viscosity of the oil increases, and the oil is difficult to discharge. Note: The power supply of the transmission device should be cut off to prevent unintentional power;

3. During work, when the oil temperature rises more than 80 ° C or the oil pool temperature exceeds 100 ° C and abnormal noise is generated, the use should be stopped, the cause should be checked, the fault must be removed, the lubricating oil can be replaced before the operation can continue;

4, the user should have reasonable use and maintenance rules and regulations, the operation of the reducer and the problems found in the inspection should be carefully recorded, the above provisions should be strict

 

2.Maintenance

When choosing the grease according to the bearing load of the travelling reducer, the grease with small needle penetration should be selected for the heavy load. When working under high pressure, in addition to small penetration, it also has high oil film strength and extreme pressure function. Calcium grease has good water resistance, water is not easy to emulsify deterioration, can be applied to wet environment or contact with water of various mechanical parts lubrication. When choosing the grease according to the working temperature, the main indicators should be the drop point, oxidation stability and low temperature function, the drop point can generally be used to evaluate the high temperature function, the actual working temperature of the bearing should be lower than the drop point 10-20℃. The use temperature of synthetic grease should be 20-30℃ lower than the drop point.

Different lubricants are prohibited from mixing with each other. The location of the oil level plug, oil drain plug and ventilator is determined by the installation position.

 

3.Oil level check:

1. Cut off the power supply to prevent electric shock. Wait for the reducer to cool down;

2, remove the oil level plug to check whether the oil is full;

3. Install the oil level plug.

Oil inspection:

1. Cut off the power supply to prevent electric shock. Wait for the reducer to cool down;

2. Open the oil plug and take the oil sample;

3, check the viscosity index of the oil: if the oil is obviously cloudy, it is recommended to replace it as soon as possible;

4, for the reducer with oil level plug: check the oil level, whether it is qualified; Install the oil level plug.

 

4.Oil change:

After cooling, the viscosity of the oil increases and it is difficult to discharge the oil, and the reducer should change the oil at the operating temperature.

1. Cut off the power supply to prevent electric shock. Wait for the reducer to cool down without burning danger;

Note: the reducer should still be kept warm during oil change;

2. Place the oil drum under the oil plug of the oil discharge

3, open the plug, ventilation cap;

4. Drain all the oil;

5, the plug is still installed;

6, into the same amount of 320# lubricating oil;

7. Screw on the oil plug and vent cap and open the vent hole

Hot Tags: industrial worm gearbox, China industrial worm gearbox manufacturers, suppliers, factory, worm gear pinion, Nmrv 040 Worm Gearbox, compact worm gearbox, worm drive dc motor, small worm drive, small worm drive gearbox