Aluminium Worm Gearbox Reducer

In the reducer family, Aluminium worm gearbox reducer is used in servo, stepping, DC and other transmission systems because of its small size, wide deceleration range and high precision. Its role is to ensure precision transmission, mainly used to reduce speed and increase torque and reduce the load/motor moment of inertia ratio. In the past few years, some users in the use of the reducer, due to illegal installation and other human factors, resulting in the output shaft of the reducer broken, so that the enterprise suffered unnecessary losses. Therefore, in order to better help the majority of users to use the reducer, to introduce you in detail how to correctly install the Aluminium worm gearbox reducer

The correct installation and use of reducer are important links to ensure the normal operation of mechanical equipment. Therefore, when installing Aluminium worm gearbox reducer, please be sure to strictly follow the following installation and use related matters, carefully assembled and used.

First step ,Before installation, confirm whether the motor and reducer are intact, and strictly check whether the dimensions of the parts connected with the motor and the reducer match. Here are the dimensions and tolerances of the positioning boss of the motor, the input shaft and the reducer groove.

The second step ,Unscrew the screws on the dust hole outside the reducer flange, adjust the PCS system clamping ring to align its side hole with the dust hole, insert the hex and tighten. After that, remove the motor shaft key.

The third step,Connect the motor to the reducer naturally. When connecting, it must be ensured that the concentricity of the output shaft of the reducer and the input shaft of the motor are consistent, and the outer flanges of the two are parallel. If the concentricity is inconsistent, it will cause the motor shaft to break or the gear of the reducer to wear. In addition, during installation, it is strictly prohibited to hit with a hammer to prevent excessive axial or radial force from damaging the bearing or gear. Be sure to tighten the mounting bolt before tightening the force bolt. Before installation, the motor input shaft, positioning boss and reducer connection parts of the anti-rust oil with gasoline or zinc sodium water wipe. Its purpose is to ensure the tightness of the connection and the flexibility of operation, and to prevent unnecessary wear.

The correct installation, use and maintenance of the reducer is an important part of ensuring the normal operation of the mechanical equipment.

Hot Tags: aluminium worm gearbox reducer, China aluminium worm gearbox reducer manufacturers, suppliers, factory, worm screw motor, stepper motor worm drive, worm drive screw, 12 volt dc worm gear motor, small worm gear set, chain sprocket gear