The working principle of worm gear is based on spiral transmission and friction transmission. The worm gear is driven by the rotation of the worm to achieve power transmission. It also has the characteristics of self-locking and high reduction ratio.
Worm gear transmission is an important mechanical transmission device. Its working principle and characteristics are as follows:
1. Spiral transmission principle
The shape of the worm is similar to that of a screw, and its spiral surface is tightly meshed with the gear surface of the worm wheel. When the worm rotates, the helical teeth on its spiral surface drive the teeth of the worm wheel to mesh and move, so that the worm wheel rotates along the axis perpendicular to the worm. This spiral transmission mechanism converts the high speed of the input into the low speed of the worm wheel to achieve the deceleration function.
2. Friction transmission and self-locking
There is a large sliding friction force on the contact surface between the worm and the worm wheel. This friction force not only transmits power, but also gives the worm gear transmission a unique self-locking property. When the lead angle of the worm is smaller than the friction angle of the contact surface between the worm wheel and the worm, the worm wheel will not be able to reverse drive the worm, that is, only the worm is allowed to drive the worm wheel to rotate. This feature is particularly useful in mechanical devices that need to prevent reverse rotation, such as lifting machinery and valve regulators.






