The material selection of the gearbox is mainly based on the usage scenario and performance requirements. The most commonly used materials include cast iron, cast steel, aluminum alloy and special alloy steel, as follows:
I. Classification of main materials
Cast iron
Gray cast iron: low cost, good casting performance, suitable for low-speed and high-torque scenarios (such as agricultural machinery and textile machinery), but low strength and easy to crack.
Ductile cast iron: mechanical properties are close to cast steel, strong impact resistance, and can replace some cast steel applications.
Cast steel and alloy steel
Cast steel: high-strength alloy steel casting, wear-resistant and impact-resistant, suitable for medium-speed and medium-torque industrial equipment (such as heavy machinery).
Alloy carburizing steel (such as 20CrMnTi, 22CrMnMo): hardness and toughness are improved through heat treatment, widely used in automotive gearbox gears, with high hardenability and fatigue resistance.
Aluminum alloy
The lightweight advantage is significant, used in scenarios such as automobiles and electric vehicles that need to reduce weight, but the strength is low and the load conditions need to be controlled.
Engineering plastics
Nylon, Bakelite and other materials are suitable for high-speed and light-load scenarios (such as small equipment) and can reduce noise, but large gears still require metal materials.
2. Special scenarios and emerging materials
High temperature/high load scenarios: Use T31 special plastic, which has high wear resistance and heat creep resistance, and can replace the application of traditional plastics in micro planetary reducers.
Surface treatment process: Carburizing and quenching, hard chrome plating, nitriding, etc. can improve the hardness and corrosion resistance of gears, which are common in high-speed or heavy-load gears.
3. Core principles of material selection
Comprehensive consideration of load, speed, environment and cost:
Low speed and heavy load → cast iron/cast steel;
Lightweight requirements → aluminum alloy;
Automobile gearbox → alloy carburizing steel;
Micro/noise reduction scenarios → engineering plastics or special materials.






